|
详细信息
设备介绍
光纤着色复绕机主要用于对光纤表面进行着色，便于束管中多根光纤的识别．由于采用了先进的精密加工手段，使固化炉的精度大大提高，虽然采用4KW灯管，但是性能绝对优于同类厂家的6KW固化炉．另外，它还可用于光纤的复绕。本设备的特点：运行速度高达1200m/min采用西门子PLC控制，具有自动报警、停机功能。
Equipment introduction
It is mainly applied to color for optical fiber furname and convenient to distinguish multistrip optical fiber in bunched tube.Due to adopt advancde precious method,it improves solidify oven precious.Although adopts 4KW lamp-tube,it is advantage to 6KW solidify oven of the same kind factory.In addition,it is also applied of optical fiber.Its feature:running speed get to 1200m/min,Siemens PLC control,automatic alarm and stop.
设备主要参数 Main Technical Data
● 着色速度：800-1200mm/min(充氮气)
● 最大复绕速度：1000m/min
● 复绕张力：0.2N-1N±0.05N
● 涂层厚度：3-6μm
● 适合线盘尺寸(mm):Ф236×Ф160×108,轴孔Ф25.4(25km康宁盘)
● 自重约(Kg)：800
● 供电：三相四线 380V 50Hz
● 功率：约6Kw
● 工作环境温度：20-30±5℃
● 工作环境相对湿度：小于65%
Main technical data
● Color speed: 800-1200m/min (pour into nitrogen by DSM color ink in America)
● Max repair speed:1000m/min
● Rewind tension:0.2N-1N±0.05N
● Coating thickness:3-6μm
● Suitable wire drum size: Ф236×Ф160×108, shaft hole Ф25.4 (25km Kangning drum)
● Weight: approximately 800KG
● Supply power: three-phase four lines 380V 50HZ
● Power: approximately 6KW
● Working environment temperature: 20-30±5℃
● Working environment relative humidity: less than 65%
|
